[Release Note]: FJD Trion Scan S1-V2.6.1
20 junho, 2025 por
charlie.li

We are thrilled to introduce the latest update of our FJD Trion Scan S1- V2.6.1. Here are the new features and optimizations in this version: 


New Features

1. Fixed Point Marking

Mark specific points while you're scanning with Insta360 X3 camera and future X-series models. You can then see these marked points in the fusion feature within the FJD Trion Model app.


2. Display Age of Differential for RTK

Display the age of differential next to the RTK fix status, helping you understand why your RTK might not be working right. A value under 5 indicates low latency and smooth performance.


3. Real-Time Baseline Distance and GNSS System Display

Support real-time display of satellite systems being used, including BeiDou (BDS), GPS, Galileo, and GLONASS. More systems mean more satellites, giving you better positioning accuracy and performance.

 - Baseline Distance: Show real-time distance to the base station. If it's over 20 km, your accuracy may drop, so it's best to switch to another node. 

- GNSS System Count: Display how many satellite systems are currently used. If it's fewer than 3, we suggest switching nodes for better results.


4. Firmware Update Reminder

Push a popup reminder when a new firmware version is available.

  • Recommended Update: You can cancel the update if you want. Your device will still work without this update.

  • Forced Update: You can't cancel the update. If you don't update, your device won't work anymore.





Optimized Features

1. iOS Internet Access in AP Mode (Scan App V3.1 required)

When your iPhone connects to the S1 using AP mode, your phone will still use its mobile data (4G/5G) for internet access. You'll see "4G" or "5G" in your phone's status bar, not "Wi-Fi".

This is helpful for RTK-assisted scanning. If the STA mode fails, try switching to the AP mode.

2. Updated the Icon for Switching View Modes

3. Optimized the Close Button for Multi-File Download Selection


How to Update Your Scanner

1. Make sure your scanner has enough battery charge or is plugged into power. Do not power it off during the update. 

2. Turn on your scanner and connect to it. 

3. Go to Settings->Firmware Update. Then, follow the on-screen instructions to download and install the update.

 4. If the update is successful, you'll see "2.6.1" as the firmware version. 

5.If any issues occur, please contact your regional sales manager for support.

 We recommend using the FJD Trion Scan App for updates.


Mobile App Download

  • Android Users: Download FJD Trion Scan on Google Play.
  • iOS Users: Download FJD Trion Scan on the App Store.