I. Version Description

1. File Download Upgrade
   • Download all project data in a batch. When you download it, a separate folder will be created for each project, keeping all the scan data neatly organized.
   • Cancel any ongoing downloads directly as needed. The system will then delete the data from those canceled downloads.
2. Device Self-Check Upgrade
   • Enable self-check for more devices, including cameras, RTK, and other hardware.
3. Added Camera Shooting Parameter Settings
   • Adjust shutter speed and ISO settings for Insta360 X3/X5 cameras in time-lapse mode.
4. Support for Control Point Collection Using Centering Pole
   • Connect your scanner and configure this feature on "Settings"->"Control Point Collection Settings".
5. Added Long-Time Mode
   • Added a new "Long-Time Mode" so you can scan for much longer (over 20 minutes). To ensure optimal performance during these long scans, only the last 3 minutes of data will be shown on the screen. This works the same way as it does in Car Mode and Drone Mode.
6. Added Map Function
   • View the map and positioning information while you're scanning. You can also import KML files to make your outdoor work more convenient.
7. CORS Application Popup Optimization
   • Improved the validation process by verifying user information separately from server information.

II. How to Update Your Scanner

1. Make sure your scanner has enough battery charge or is plugged into power. Do not power it off during the update.
2. Turn on your scanner and connect to it.
3. Go to "Settings"->"Firmware Update". Then, follow the on-screen instructions to download and install the update.
4. If the update is successful, you'll see "1.3.0" as the firmware version.
5. If any issues occur, contact your regional sales manager for support.